Durable materials and a traditional design make this an economical alternative to heavier, more expensive anchors. Constructed of high tensile steel. Hot dipped galvanized and specially treated to ensure a long lasting, bright finish. 20\" Stock Length, 15-1/2\" Fluke. Specially designed to fit smaller anchor lockers....

Replace your noisy chains with self-coiling hitch cables. Black vinyl jacketed cable with safety latch hook. Durable galvanized aircraft cable construction. Exceeds SAE J684 standards for trailer coupling and automotive type hitches. NMMA certified....

...

With no hydraulics and no electrical switches, fully automatic Smart Tabs are a one of a kind solution to improve boat performance. The trim plates deploy downward at slow speeds to maximize lift and reduce bow rise, then rotate up during acceleration. At cruising speeds the trim plates continuously adjust to the water pressure acting like shock ab...

Corrosion resistant 316 stainless steel pull-up cleats recess flush to the deck for an attractive contemporary look. The stud mounted fasteners are hidden and will accept drain hoses for water drainage to bilge.#0415041 includes backing plate....

For use as a lifting or securement point these eye nuts are constructed of investment cast marine grade 316 stainless steel for maximum corrosion resistance and durability. Designed to be screwed onto threaded rod stock or bolts to accommodate varying transom thicknesses....

Electro-galvanized steel tiller rope springs provide tension between the tiller rope and jaw shackles....

Stainless steel bracket and eye pad. Feeds line onto anchor control system to avoid uneven line buildup. Carded....

For use with rope, wire or cable. Constructed of corrosion resistant die cast manganese bronze, they can be used for tie-downs, lifting wires or in other rigging applications. 360° swivel strap eye eliminates tangling. Spring-loaded bolts provide secure closure with the advantage of an easy-open thumb lever....

Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Can be used for tie-downs, lifting wires or in other light duty rigging applications. Ideal for use with 1 webbing....

Handles many different types of load from any direction. Forged 316 stainless shackles feature a captive pin closure. When open the pin completely clears the opening of the shackle and is recessed into a secured flush position. The pin remains captive and will not fall out, no risk of loss due to vibration. Ideal for rigging applications where sing...

With their rounded shape bow shackles are designed to handle many different types of load from any direction. Constructed of hot dip galvanized drop forged steel these shackles feature a screw pin closure and are ideal for joining anchors to mooring chain. These Screw Pin Anchor Shackles are forged to comply with Federal Spec. RR-C-271b and are loa...

...

Designed to place more of the load on the stronger, non-gate side which significantly increases the breaking strength over traditional rounded style snap hooks. The offset body style allows greater gate clearance, increasing the passage area into the snap. The eye insert provides a secure attachment to lines for use on harnesses, fishing lines, moo...

These carabiners feature an interlocking spring-loaded gate snap for quick attachment to a wide range of fixing points. Constructed of formed 316 stainless steel for corrosion resistance and durability. Multifunctional they can be used for lifting, rigging and anchoring applications. Integral eye insert provides a secure attachment for use on harne...

UV stabilized injection molded nylon. Provides a quick and easy way to attach ski ropes to ski tows....

Zinc plated cast steel....

Used to protect wire or rope from contacting with the load it is hoisting, thimbles keep the eye splice from being crushed while reducing chafe and abrasion. Constructed of hot dipped galvanized stamped steel these thimbles are ideal for anchor and mooring lines....

Links together two parts, reducing knotting or twisting and relieving stress. Hot dipped galvanized stamped steel swivels are ideal for anchor to chain connections. The swivel action also facilitates anchor set by allowing the anchor to rotate freely and dig in to set more quickly....

Heavy duty hinges constructed of corrosion resistant, stamped 304 stainless steel to withstand the harsh marine environment. Installs with FH fasteners (not included)....

Corrosion resistant heavy-duty investment cast 316 stainless steel Hatch Hinge features a removable clevis pin with split ring for easy separation. Includes stop to hold hatch in upright position when open. Easily installed with eight #10 FH fasteners (not included)....

Heavy duty corrosion resistant stamped 304 stainless steel swivel hasps. The swivel eye rotates acting as a temporary lock, but will also accept most padlocks for more permanent protection. Installs with four #8 FH fasteners (not included)....

Brass body. Includes 3 keys....

Constructed of formed 304 stainless steel for corrosion resistance and durability. Features integral 5/16-18 threaded studs and installs with two 5/16-18 nuts (not included)....

.850 Nylon track slides....

Provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Functions as an alternative to a brace kit. UV stabilized injection molded nylon construction. 1/4 pin size. For use in 0.850 or 1.050 track....

Provide slide adjustment for the convenient use and storage of Bimini top frames. Designed to attach an eye end. Functions as an alternative to a brace kit. Locking Deck Hinges utilize a filister screw to lock hinge in place. UV stabilized injection molded nylon construction. 3/16 pin size. For use in 0.850 track....

Provides slide adjustment for the convenient use and storage of Bimini top frames. Track Slide Locks create a termination point. UV stabilized injection molded nylon construction. For use in 0.850 track....

Used in conjunction with an Side Mount Eye End, it converts standard internal eyes into quick release fittings. These 90° eye ends fit 3/4 OD tubing. Bracket installs with two #8 FH fasteners (not included). Constructed of UV stabilized injection molded nylon....

These injection molded nylon jaw slide and bracket fittings are components in a Bimini top fitting system. They are are designed to mount on the side of the gunnel and have the jaw slide snap onto it. The jaw slide then glides along the bracket and is adjusted and secured by the head screw.2735681 has a 1/4-28 x 3/4\" thread....

Top Fitting inserts for 1 square tubing are constructed of UV stabilized injection molded nylon. Create an attachment point and function as a pivot point as part of a Bimini top system.1/4 Pin size....

Constructed of chrome plated die cast zinc. Recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with included set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/8 OD stainless tubing with a wall thickness of 0.049\"....

Constructed of chrome plated die cast zinc. These Rail Base Fittings are recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with included set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/8 OD stainless tubing with a wall thickness of 0.049\"....

Constructed of chrome plated die cast zinc. Recommended for freshwater use. Installs to deck with #10 FH fasteners (not included). Fittings can be attached to railing with set screws or can be pop riveted using stainless or aluminum rivets. For use with 7/8\" OD stainless tubing with a wall thickness of 0.049\"....

Constructed of chrome plated die cast zinc. Recommended for freshwater use. For use with 7/8 OD stainless tubing with a wall thickness of 0.049\"....

Unique multi-lobe seal. Heavy gauge steel body, hard chromium plated shafts, bronze bushings and polymer end fittings....

Gas Lift Mounts and ball studs are constructed of 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball....

Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8. Installs with three #12 FH fasteners (not included)....

Lightweight and portable. One-piece injection molded polypropylene construction makes it easy to clean and maintain. Hooks attach to underside of gunnel (no holes required) allowing the tray to hang over the side of the boat....

The adjustable flag pole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flag pole using nylon adjustable flag pole clips in conjunction with stainless steel spring wire quick release clips allowing mounting flexibility for a variety of flag or penna...