Nickel plated brass fittings for coaxial cable installation applications....

Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included)....

Constructed of stamped 304 stainless steel. One pair includes port and starboard lights. For replacement of existing lighting (not for new construction). Installs with six #4 RH fasteners (not included)....

Approved for USCG 2NM (Colreg 2 mile). Constructed of injection molded nylon and aluminum. 12VDC. Low amp draw. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines.Refer to USCG regulations for NM navigation lights for ...

Durable, high-density polyethylene in vibrant red for use with gasoline, diesel or kerosene fuels Includes Flo n\'Go fluid transfer siphon/pump, pump holder handle and 10\' long fuel hose Dual mechanical shut-off valves, at both tank and hose, for spill-proof Flo n\' Go disconnection UL approved, mechanically vented fill cap Fluid transfer on lev...

Powder coated steel. At 107 decibels and a frequency (Hz) of 44020A, this horn meets USCG COLREGS and ABYC standard A-23 for vessels under 12m (39\'). NMMA Type Accepted #2577068....

Constructed of machined and stamped brass and a lacquer coating to prevent tarnish with solid brass knurled adjusting knobs. The interior surface of the lamp shade is white enamel to reflect more light. Prewired with integral on/off switch. Includes a 15-watt DC double contact bayonet style bulb. Designed for bulkhead or wall mounting. Installs wit...

Cadmium free, environmentally friendly.Aluminum: For salt and brackish water. Conform to: Mil-Spec A-24779(SH) Magnesium: For freshwater only. Conform to: Mil-Spec A-21412(SH)...

Cadmium free, environmentally friendly.Aluminum: For salt and brackish water. Conform to: Mil-Spec A-24779(SH) Magnesium: For freshwater only. Conform to: Mil-Spec A-21412(SH)...

These Buss Bar Stud Terminal Blocks are primarily used to route and connect power or ground circuits. The raised bus provides easy access on a single stud, making it useful for consolidating multiple wires or feeding multiple circuits. Constructed of tin plated brass and ABS. Maximum: 48VDC. Installs with #10 RH fasteners (not included).426768 has ...

215/60-8 Tires are ideal for use on golf carts used on concrete, asphalt and other hard surfaces....

Features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel, for maximum corrosion resistance and superior durability. Designed for medium duty lifting and rigging applications. Handy for anchor lines, tethers, paddle leashes, bow lines, and tow ropes....

Constructed of corrosion resistant injection molded nylon. Designed to press fit into a 1\" diameter round hole. Ideal for venting areas that may be subjected to heat or moisture build-up....

Investment cast 316 stainless steel for corrosion resistance and durability, the safety snap hook is ideal for marine applications. Superior breaking strength and a fast eye detail that provides secure line attachment make these snaps suitable for safety harnesses, fishing lines and mooring buoy lines....

Four Position Magneto Style Ignition Switch is constructed of polypropylene. For accessory, off, ignition, start, and choke functions. 13/16\" diameter short shaft for a maximum panel thickness: 5/8. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys. Push to choke....

Constructed of chrome plated steel. This pair of long, spring-loaded, serrated jaw Alligator Clips are used for creating temporary electrical connections. Color coded to avoid polarity misidentification. Includes one positive and one negative battery clip. 10A max....

Fire resistant injection molded nylon, suitable for use in engine room compartments. Features 15A 12VDC illuminated SPST On/Off rocker switches and fuse holders for use with standard AGC glass fuses. Individual circuit 10A max. 37A total. 12VDC. Includes 20 preprinted decals. Uses #6 RH fasteners (not included). Meets CE specifications....

Swivel Drink Holder features a quick release bracket for easy removal. Includes foam insulator, two wall brackets for flexible placement, and installation fasteners. Chrome plated brass wire construction....

Drain Tube Flaring Tools for installing 1\" drain tubes. Drain tube not included....

...

Designed to instantly cut battery power when detached. Constructed of injection molded nylon and Delrin. The 7 key 50 lanyard fits OMC, Johnson, Evinrude, Mercury, Mariner, Force, Yamaha, Honda, Tohatsu, Suzuki, and Nissan kill switches....

Tin plated copper/injection molded nylon. Terminals comply with ABYC standard E-11....

Four Position Ignition Switch is constructed of stamped brass. For accessory, off, ignition, and start functions. 13/16\" diameter long shaft. Maximum panel thickness: 1-1/8. Four screw terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid 30A @ 12VDC. Accessory: 15A @ 12VDC. Includes two keys....

Lightweight and small this kit includes a quick release tab for quick and easy removal. Water and shock resistant, it features rubber seals and booted switches for durability. The versatile C-clamp mount allows for horizontal or vertical attachment. Includes: red/green LED bow light, white LED stern light, quick release light mounts, pole, two C-cl...

Constructed of zinc plated steel. Recommended for freshwater applications. Angle mounts securely to gunwale with six RH fasteners (not included)....

Injection molded nylon fuses feature tin plated connector blades for improved corrosion resistance. Fast acting fuses provide better protection for electronic devices. For use with ATM mini style fuse holders. 7/16\"W x 5/8\"H....

Constructed of corrosion resistant cast 316 stainless steel. Slotted cap requires a key to open and close. All fills and replacement caps (except waste) include attachment chain. Installs with three #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking.1-1/2 hose cap features 1-1/4\" 11-1/2 NPSM straight threads...

Constructed of corrosion resistant stamped brass. Two circuits (normally Off) three position: Off/On/On. When pushed in all the way, the switch is turned off. When pulled to the first position, the first circuit is activated. At the second position, the first circuit is deactivated and the second circuit is activated. Maximum panel thickness: 1. 15...

Holds beverage cans with or without insulated can wraps, as well as most standard size bottles. Drain allows water to be drained directly into the bilge with the use of 1/4\" tubing (not included). Requires a 3-5/8\" diameter hole for installation. The bottom is padded with a rubber insert to prevent rattling. Includes mounting gasket. Constructed ...

This Buss Bar Screw-Terminal Block is equipped with two each #10-24 studs for main wire connection. Constructed of tin plated brass and ABS. Designed for use with tinned copper marine wire which shares the same expansion rate to prevent loosening wires and reducing electrolytic corrosion caused by pairing two disparate metals. Maximum: 48VDC, 100 a...

It Floats™ Locking Winch Handle\'s patented design is made by air assist injection molding instead of a foam filled method, thus preventing any potential leakage of foam from within the handle. Features ball bearings in the handle to ensure smoother action under load....

A repair primer for use with the Awlcraft SE coating system. It can be used for any repair, from the smallest scratch to a large scale repair and is applied directly to the area to be repaired....

T0195 is a blending solvent for use when repairing any Awlcraft SE coating system. It is mixed with Awlcraft 2000 Clearcoat (F3029) to enable a smooth seamless repair....

A blending solution for use when repairing a Metallic or Pearl Awlcraft SE coating system. Mixes with Awlcraft SE Basecoat to enable a smooth seamless repair....

...

Steering knob attaches to the wheel to allow the driver to turn the steering wheel more quickly. Constructed of investment cast stainless steel for corrosion resistance. Designed for use with 1\" x 3/4\" oval tubing....

Features a spring-loaded latch for easy attachment. Constructed of investment cast 316 stainless steel for corrosion resistance and durability. Designed for medium duty lifting and rigging applications. 360° swivel eye eliminates tangling....

Weldable bow eyes are designed to add or replace a tie-down point on your boat\'s bow. Sand cast aluminum construction, for maximum corrosion resistance and durability. Weldable for permanent installations. Designed for use on aluminum vessels. Cast 356-T6 Aluminum. This alloy contains lead....

Open base cleats feature die-cast aluminum construction. Large base distributes heavy loads evenly. Designed for use on docks or aluminum vessels. Countersunk for FH fasteners (not included)....

Includes 2 windshield brace feet and an aluminum tube. Injection molded nylon feet inserts must be crimped in place. Uses #10 PH screws (not included)....