...

Waterproof Heavy Duty Wiper Motors are a two-speed, self-parking motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated aluminum housing with stainless steel mounting bracket, shaft, and knurled fitting. Adjustable right or left-hand park, fac...

Fit all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Side bristles make it easy to clean in hard to reach places. 10-1/2 head is longer than industry standard, covering a larger cleaning area.Soft is scratch resistant for gelcoat, paint, and plastic windows. Medium is a good overall brush for textured and non-skid surfaces. Stiff is ef...

A two-speed, self-parking heavy duty motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Powder coated steel and aluminum housing with stainless steel mounting bracket, brass and stainless steel shaft with brass knurled fitting. Adjustable right or left-ha...

Includes a waterproof frame mount, wiper motor, an adjustable wiper arm (9-1/2\"-12-1/2\"), and an 11 curved blade. Powder coated aluminum/304 stainless steel construction. IP66 rating. CE approved. 3-year warranty....

Includes a frame mount, wiper motor, adjustable standard wiper arm (9-1/2\"-12-1/2\"), and an 11 curved blade. Powder coated aluminum/304 stainless steel construction. CE approved. 3-year warranty....

Standard Wiper Motor for interior/protected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion proof powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for left-hand park. Powe...

Fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. This medium bristle brush is constructed of Injection molded nylon. This angled brush is great for reaching areas below the waterline and overhead hard-to-reach spaces....

An injection molded nylon crown that fits the tip of an adjustable boat hook or any universal/Acme thread. Optional Webbing Straps are used for positioning the Support Crown securely in place.4911151 Includes: Three 15\' straps, with a securing loop on one end and an adjustable snap clip on the other....

Convenient and easy solution for attaching a mooring line to a buoy or cleat. Using the included keeper plate, these channeled 316 stainless steel snaps fit onto the end of boat hooks or other poles. The kit includes the snap hook, keeper plate, and fasteners for attaching the keeper plate. The carabiner snaps shut as it slides free of the pole, se...

...

Waterproof Standard Wiper Motor for exterior/unprotected locations. Sweep angle is preset at 80° or 110°, but can be reset to 40°, 50°, 60°, 70°, 80°, 90°, or 110°. Corrosion resistant powder coated all aluminum housing with stainless steel base plate, shaft, and knurled drive nut. Adjustable right or left-hand park, factory preset for lef...

Compact size allows for installation in a variety of locations - the same round size as a standard 12V receptacle. For interior or fully protected locations only. Volts 4-30. Injection molded nylon.4216251: Amps 10. DC shunt not required....

...

Compact ceramic cold water tap with a tall swiveling and folding spout for vertical or horizontal installation. Spout folds and swivels for minimum obtrusion when tucked away. Chrome plated brass. Water connection 3/8\" BSP threaded shaft with 1/2\" NPS-M Nylon adaptor included. Mounting hole 5/8\". 1/4 turn ceramic valve....

Compact ceramic cold water tap with a low swiveling and folding spout for vertical or horizontal installation. It\'s low profile and short spout gives it the ability to be installed in locations with limited space. Water connection 3/8\" BSP threaded shaft with 1/2\" NPS-M Nylon adaptor included. Chrome plated brass. Mounting hole 5/8\". 1/4 turn c...

Powder coated steel and injection molded nylon. Includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8\" x 3-3/8\". At 106 decibels and a frequency (Hz) of 44020A, this horn meets USCG COLREGS and ABYC standard A-23 for use on vessels under 12m (39\'). NMMA Type Accepted #2577064....

...

Made of durable, low maintenance Passivated 304 Stainless Steel. This light weight cold water tap is perfect for installation on flybridge or aft cockpit locations. Water Connection 1/2\" NPS male fitting. Material passivated 304 stainless steel, brush finish. Mounting hole 7/8\"....

Made of durable, low maintenance Passivated 304 Stainless Steel. Water connection: flexible supply lines with 1/2\" NPS-F fittings. Material: passivated 304 stainless steel, brushed finish. Mounting hole: 1-1/4\".74103 for flybridge or aft cockpit locations74121 for galley or bar locations...

Durable molded rubber Steering Cable Boot protects the output end of all standard steering cables keeping dirt, debris, and moisture out and extending the service life of the cable. Includes two cable ties....

Made of durable, low maintenance passivated 304 stainless steel. This light weight cold water tap is perfect for installation on flybridge, bar or aft cockpit locations. Water connection: 1/2\" NPS-M. Material: passivated 304 stainless steel, brush finish. Mounting hole: 7/8\"....

...

18/10 Stainless steel. 2-3/16\" Drain opening, Profile A.Brushed finish sinks: recommended for exterior installation due to the reflective nature of the mirror finished sinks.Mirror finish sinks: not recommended for exterior use due to the reflective nature of the polished stainless steel....

18/10 Stainless steel mirror finish rectangular sinks. Take full advantage of the space in your galley, create your own multibowl sink with two or more rectangular sinks. Mirror Finish basins are not recommended for exterior use due to the reflective nature of the polished stainless steel. 2-1/16\" Drain opening, 1/2\" flange, Profile A....

...

Dual USB Power Socket charges two devices simultaneously. The total output 4.8A load is split 2.4A per side as needed. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Blue LED illumination. IP65 rating....

Dual USB Rocker Switch Style Power Socket charges two devices simultaneously. Fits into any 13/16 x 1-7/16 rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. Protective dust cap extends the life of the charger. Constructed of injection molded nylon. Output DC 5V/4.8A. Input 12-24VDC. Blue LED illumination. IP65 rating....

Constructed with a nickel plated 304 stainless steel bezel for style and corrosion resistance. Feature 12 LEDs; 8 warm white @ 0.19A (143 lumens) and 4 red @ 0.06A (43 lumens) for night vision. Installs with two #6 FH fasteners (not included). 12-28VDC. IP65 rating. CE approved.w/ switch: 3-way switch activates by pressing the center of the lens. S...

Nylon webbed strap with a hook and a bow loop made for personal watercraft trailer winches....

Pull-out chrome ABS plastic handle for Galley Mixers 10871 and 10880. Thread type: 1/2\" NPS-M....

Works with all Sea-Dog® MaxBlast air horns. For use in tight installation applications where a side air hose attachment is required. Does not include air tubing or mounting hardware. 12VDC. Maximum: 20A....

10303P 3-1/2\" Long, with 1-1/4\" female threaded connection & 1-1/4\" outlet.10316P 4-/8\" Long, with 1-1/2\" female threaded connection & 1-1/2\" outlet....

Comes complete with everything needed for a new installation. Includes tank with pump, wiring harness for the pump motor connection, toggle switch, 15\' of clear tubing, hose barb tee, two spray nozzles and mounting bracket with fasteners. Tank capacity is 2.5 liters/2.66 quarts. Fastener #10 RH....

For solo watercraft launching. The no-hassle launch cord, made of premium elastics, uses automatically adjusting tension when you back your boat, jet ski, or tow tube into the water, so it won\'t jerk your watercraft around when you pull the trailer forward. Fasten a hook to your trailer, connect a steel ring to the winch, and lock the winch. You\'...

Heavy duty cast basin mixer with ceramic valve and single lever control. Water connection: flexible supply lines with 1/2\" NPS-F fittings. Material: chrome plated brass. Mounting hole: 1-1/2\"....

No frills, no apologies, just straight sonar performance. The HELIX 5 offers a wide, bright screen to reliably show fish, bottom and structure down to 1500\' depths....

High reach J spout, chrome plated brass folding mixer. Separate side mounted single lever controls provide positive adjustment. Water connection 3/8\" BSP threaded shafts with 1/2\" NPS-M nylon adapters included. Mounting holes: (2) 5/8\". 1/4 turn ceramic valves....

Heavy duty cast spout. Water Connection: flexible supply lines with 1/2\" NPS-F fittings. Material: chrome plated brass. Mounting hole: 1\". 1/4 turn ceramic valve....

This one-piece Boat Hook/Paddle Clip allows for the simple, one handed storage of your boat hook or paddle. Features leash attachment points for securing a paddle leash. Anti-snag ramps prevent line from getting stuck under the clip when not in use. Constructed of UV stabilized injection molded nylon....