SILVERADO 4000 PREMIUM FUEL LINE ASSEMBLY - NON COMPLIANT (SIERRA) 3/8" x 8' Universal

Specifications

Category Name	Fuel-fuel Lines/fittings/valves	Stock Number	47-8015S1	Sale Type	New
Manufacturer	Dometic / Sierra Engine Parts	UPC	808282369552	Hazard	9
LNSuse3	27399	ModuleID	PF_465129	DMPPartNo	38-3582
KMSPartNo	SIE 8015S1	AS400Description	FUEL LINE 8FT 3/8 UNIV NONEPA	VendorItemNumber	18-8015S-1
WebLongDescription	Non EPA Complaint, complete fuel line assemblies. Thermoplastic construction resists UV. Barrier layer prevents permeation.	WebShortDescription	Fuel Line 8' 3/8 Univ Non-EPA Approved	Price

Description

Non EPA Complaint, complete fuel line assemblies. Thermoplastic construction resists UV. Barrier layer prevents permeation.
WARNING - Special care should be taken when coupling Shields series 331, 337 and 368 EPA approved barrier fuel hoses. Always use a lubricant when inserting a fitting. Oil based or other lubricants designed for rubber or plastic assembly should be used. Silicone is not recommended as it may cause coupling retention issues. Over-sized fittings should not be used. The fitting should slide into the hose with minimum, but some, resistance. Using fittings with oversized barbs may result in damage to the barrier layer. If the fitting is too small it may not be possible to get a good seal. Sierra recommends the use of Oetiker stepless ear clamps or worm drive clamps to attach the fuel hose. Do not use wire ties or spring tension clamps. Over-tightening a worm drive clamp may result in damage to the inner layer and cause fuel to get in between the layers. This will cause the layers to separate and block the flow of fuel.